€53.55
pcs
Item description
Materials:
shock absorber body and accessory: Steel bronzing, piston rod: hardened, rust-free steel

Temperature range:
-10 to +66 °C

Stroke speed:
0,15 to 4 m/s

Fixed limit stop:
integrated

Information:
Exceeding W4 (max. energy consumed per hour expressed in Nm/h) is possible in the case of temporary switch-off, or when the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating).
Properties
Thread B M 8x1
Stroke [mm] 8
max. En­ergy con­sump­tion per stroke (W3) [Nm] 3,5
max. En­ergy con­sump­tion per hour (W4) [Nm] 5600
ef­fec­tive mass (me) [KGM] 5 - 15
Spring force [N] 2 - 6
A [mm] 4,1
E [mm] 40,9
F [mm] 3,0
G [mm] 2,5
I [mm] 13,1
J [mm] 2
K [mm] 6,4
SW2 [mm] 10
Max. axial de­vi­a­tion* [°] 2
clamp­ing flange MB 8 SC2
Stop sleeve AH 8
Side load adapter** BV 8
Lock­ing nut KM 8
Further information on MC30EUM3
Weight 11 g / pcs
Customs duty number 84879059
RoHS compliant Yes
Manufacturer ACE
Documents
*at higher axial deviations use side load adapters (Type BV)
***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available